Skip to content
Contact Us

Safety

Filter — 48 products shown of 48
Filtered by: Safety — 48 products
Labmat Bench Liner Rolls & Sheets

Labmat Bench Liner Rolls & Sheets

Safety Spill Containment
Academic Industrial & Petro Chem. Manufacturing & Quality Control Pharma & Biotech Safety Spill Protection

Disposable Labmat™ Bench Liner speeds clean-up and safeguards work surfaces from stains, spills and wear.Highly absorbent upper surface traps up to 420 mL/m² of water, dyes, corrosive chemicals or radioactive solutionsFlexible polyethylene film backing is non-skid and prevents soak-through of most solutionsAvailable in 50.8 cm (20") wide by 15.2 m (50 ft.) rolls, or 50.8 x 61 cm (20 x 24") pre-cut sheetsRolls are easily cut with the Bel-Art Safety Cutter® (F21012-0000) or scissors while roll is retained in dispenserNote: Simply roll up and discard after contamination.

Large Molded Fume Hood

Large Molded Fume Hood

Fume Hoods Safety
Academic Industrial & Petro Chem. Manufacturing & Quality Control Pharma & Biotech Safety Spill Protection

This fume hood features a one-piece polyethylene shell with a clear acrylic sash that slides on inside tracks.Sash sets open, closed, or intermediate; remains slightly open in closed position for continuous air flowStack O.D.: 15 cm (6"); exhaust system of 350 cfm recommendedFront opening: 88 x 36 cm H (34.5 x 14.19")Overall dimensions: 107 x 51 x 76 cm H (42 x 20 x 30")Shipping weight: 25.5 kg (56 lbs)

Large Molded Fume Hood with Baffle

Large Molded Fume Hood with Baffle

Fume Hoods Safety
Academic Industrial & Petro Chem. Manufacturing & Quality Control Pharma & Biotech Safety Spill Protection

This fume hood is the same as H50000-0003, shown above, but includes a flat internal baffle across the rear of the shell.Internal baffle across the rear of the shell slopes forward, leaving space beneath for air flow to sweep the deck, and space above in order to efficiently remove airborne vaporsSash can be set in an open, closed or intermediate position; remains open slightly when in closed position to facilitate continuous air flowStack O.D.: 15 cm (6")Exhaust system capable of drawing 350 cfm (free air) is recommendedShipping weight 25.5 kg (56 lbs)Note: Overall dimensions are 107 x 51 x 76cmH (42 x 20 x 30").

Large Weighted Safety Shields

Large Weighted Safety Shields

Fume Hoods PPE & Accessories Safety
Academic Industrial & Petro Chem. Manufacturing & Quality Control Pharma & Biotech Safety Spill Protection

Personnel are protected by a 4.7 mm (0.19") thick, clear polycarbonate barrier with exceptional impact resistance and optical clarity.Shields meet High Mass Impact Test and High Velocity Impact Test as defined by ANSI Z87.1, sections 9.11 and 9.12, respectivelyStable, three-sided construction provides front and side protection against flying debrisHeavy steel base is coated with blue epoxyPlated steel bolts, nuts and washers are used for assembly ensuring long life and rust-resistanceNote: Outside base dimensions are 50cmW x 17cmD (19.5 x 6.5").

Lead Lined Polyethylene Storage Boxes

Lead Lined Polyethylene Storage Boxes

Beta Protection Safety
Drug Discovery & Development Industrial & Petro Chem. Life Sciences Molecular Biology Pharma & Biotech Safety

This storage system is excellent for storing vials of isotopes, contaminated instruments and tools, radioactive samples, solutions, or waste.0.76 mm (0.030") thick lead shield encased in 6.4 mm (0.25") thick high-density polyethylene helps contain radiation without lead exposureEach box has a cover of the same lead/polyethylene construction with a 32 mm (1.25") external overlap designed to prevent radiation escapeNote: The handle opening is 89 x 29 mm (3.5 x 1.13").

Odo-Clave Autoclave Deodorizer

Odo-Clave Autoclave Deodorizer

Bags & Bag Holders Cleaning Supplies & Detergents Disposal & Cleaning
Academic Industrial & Petro Chem. Lab Maintenance Manufacturing & Quality Control Pharma & Biotech Safety

Heat-released deodorant pads neutralize autoclave odors with one of four pleasant scents.Simply open foil pouch and place pad in bag prior to autoclavingPads have a three year life span; will last longer if stored in a sealed containerAlso available in triple strength clove; releases three times the deodorant of the standard pads while costing less than two standard pads

Portable Glove Box System

Portable Glove Box System

Dry Storage Gas Purge Desiccators
Academic Industrial & Petro Chem. Manufacturing & Quality Control Pharma & Biotech Safety Spill Protection

The operator and the external environment are protected with this lightweight, self-contained portable isolation cabinet.Large acrylic window with 6” circular glove ports permits safe viewing of operations8” diameter side port allows easy insertion of material and equipmentLarge size, 22” long (20” installed) neoprene gloves (H50029-0000) provide good protection against gas, liquid or solid penetration; secured to the 6” circular port holes with clamping rings (H50029-0200)Body molded from LDPE with round corners throughout for easy cleaning

Roto-Flo Flow Indicators

Roto-Flo Flow Indicators

Flowmeters & Indicators Safety
Environmental Monitoring Industrial & Petro Chem. Manufacturing & Quality Control Pharma & Biotech Safety

Molded clear polystyrene body with smooth connecting barbs allow easy installation of these flow meters.Internal flow channel diameter: 5 mmPaddle wheel shell: 25 mmOverall length: 51 mmMaximum recommended pressure: 10 p.s.i.g.Minimum flow: 0.5 LPM / Maximum flow: 10 LPMNot for use with corrosive chemicals or fluids with a temperature in excess of 64 °C (147 °F).

Safety Step Stool

PPE & Accessories Safety
Academic Industrial & Petro Chem. Lab Maintenance Manufacturing & Quality Control Pharma & Biotech Safety

This handy step stool provides safe, easy access to high shelves, drawers, equipment and other hard-to-reach areas.Three (3) spring-loaded, swiveling casters make it easy to kick or push out of the way or into positionWhen weight is placed on the stool a non-skid vinyl bumper rests directly on the floor to prevent movementPasses EN 141183 Testing StandardMaximum weight load: 150 kg (330lbs)

Safety Waste Jug

Safety Waste Jug

Carboys, Jerricans & Jugs Plasticware & Accessories Safety Spill Containment
Academic Food & Beverage Industrial & Petro Chem. Lab Maintenance Safety Water Testing

This high-density polyethylene jug is translucent for observing content level and includes a screw-top to seal container for safe transit.Screw-on funnel top with 12 cm (4.75") diameterPerfect for safe handling and temporary storage of spent solvents or other liquid wastesSnap-on cap seals the funnel top to retain fumesCapacity: 20 L (5gal); graduated in US gallons

Self Adhesive Waste Bags – Cleanware

Self Adhesive Waste Bags – Cleanware

Bags & Bag Holders Disposal & Cleaning
Academic Industrial & Petro Chem. Lab Maintenance Manufacturing & Quality Control Pharma & Biotech Safety

Disposable waste bags free bench or hood space when hung from walls, cabinets or virtually anywhere.Peel backing off the adhesive strip across the top and hang close to your work areaBack panel is longer than the front for easy openingHigh Molecular Weight High Density (HMHD) polyethylene; steam autoclavable at 121 °C (250 °F)Pass ASTM 1709 Dart Impact and ASTM 1922 Tear Resistance TestsMaximum weight of contents should not exceed 1.36 kg (3lb)

SP Bel-Art is proud to sell through our distribution partners.

Find Yours Today