Racks

100 mm Petri Dish Mini Rack – Poxygrid

Lab Organization Racks

Cell Culture Food & Beverage Life Sciences Manufacturing & Quality Control Microbiology Pharma & Biotech

The epoxy-coated steel wire Petri Dish Mini Rack helps keep benchtops neat and organized.Holds six 100 mm Petri dishes with lidsIdeal for lab transport and incubation of dishesEpoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121 °C (250 °F)

15 mL & 50 mL Conical Tube Holder

Lab Organization Racks

Academic Lab Maintenance Life Sciences Manufacturing & Quality Control Molecular Biology Pharma & Biotech

The most versatile conical tube holder on the market, it sets up in just seconds to hold either a 15 mL or a 50 mL conical tube.Open uprights allow you to view the entire contents of the tube; no more guessing if there is liquid remaining in the conical bottomTube can be easily lifted from the holderPinching the uprights allows carrying the holder with the tubeAutoclavable polypropylene

5 mL Centrifuge Tube Rack

Lab Organization Racks

Academic Lab Maintenance Life Sciences Manufacturing & Quality Control Molecular Biology Pharma & Biotech

Designed specifically for 5 mL centrifuge tubes, including Eppendorf* brand, this rack will also accommodate other tubes with a diameter of 13-16 mm.Made of durable and corrosion resistant white polypropylene plasticEnd plates have handles for easy transport and stackingTop shelf height: 3.4 cm (1.33")Steam autoclavable at 121 °C (250 °F)* Eppendorf is a registered trademark of Eppendorf AG.

50 mL Conical Tube Holders

Lab Organization Racks

Academic Lab Maintenance Life Sciences Manufacturing & Quality Control Molecular Biology Pharma & Biotech

Leave hands free for pipetting and other critical tasks with these polystyrene plastic tube holders that securely hold a 50 mL conical centrifuge tube.Non-grip style (white) allows the tube to be lifted freely from holder as neededGrip style (blue) stays with the tube when it is lifted from the bench topTubes can easily be removed from grip style holders by holding the base and pulling the tube out

80-Well Reversible PCR & Microcentrifuge Tube Racks

Lab Organization Racks

Academic Lab Maintenance Life Sciences Manufacturing & Quality Control Molecular Biology Pharma & Biotech

Perfect for benchtop use or freezer storage, these compact, double-sided polypropylene racks accommodate 0.2 mL thin-walled PCR tubes on one side and 1.5 to 2.0 mL microcentrifuge tubes on the other, with 80 numbered wells per side in a 5 x 16 array.Twelve rack colors assist in sample organization and visual identificationMolded in handles for secure grip; matte side panel accepts tape or direct labelingFreezer storage down to -80 °CAutoclavable at 121 °C (250 ºF)Overall dimensions: 22.7 x 6.7 x 2.7 cm H (8-15/16 x 2-5/8 x 1-1/16")

96-Well Microcentrifuge Tube Racks

Lab Organization Racks

Academic Lab Maintenance Life Sciences Manufacturing & Quality Control Molecular Biology Pharma & Biotech

This double-sided, compact polypropylene rack is perfect for benchtop or freezer use, with one side for 0.5 mL microcentrifuge tubes and the other for 1.5 to 2.0 mL tubes, 96 wells per side in an 8 x 12 array.Fourteen rack colors assist in sample organization; alphanumeric index for easy identificationMatte side panel accepts tape or direct labeling; molded in handles for secure transportFreezer storage down to -80 °C; autoclavable at 121 °C (250 ºF)Overall dimensions: 21.3 x 11.4 x 2.7 cm H (8-3/8 x 4-1/2 x 1-1/16")Optional translucent cover (catalog no.

96-Well PCR Racks

Lab Organization Racks

Academic Lab Maintenance Life Sciences Manufacturing & Quality Control Molecular Biology Pharma & Biotech

Designed for preparing and storing 0.2 mL thin-walled PCR tubes and strip tubes before or after PCR sample processing applications.

Antibody Saver Tray

Lab Organization Racks

Academic Chemistry Drug Discovery & Development Life Sciences Molecular Biology Pharma & Biotech

Minimize the use of expensive antibodies during incubations by using an optimally sized tray.Polypropylene plastic trays are available for popular midi and mini gelsStackable, reclosable, reusable, and autoclavableAll trays include an attached lid to protect against spillageSingle lane trays are supplied as a group of five joined lanes; can be easily separated to single lane prior to use

Bosshead Clamp

Lab Organization Racks

Academic Chemistry

This open-sided stainless steel bosshead clamp accepts rods up to 13 mm (0.5") diameter.Holds rods at right angles to one anotherSecures rods with flat wing-head clamping screws

Bottle & Vial Racks – No-Wire

Lab Organization Racks

Academic Chemistry Environmental Monitoring Food & Beverage Industrial & Petro Chem. Water Testing

Small enough to hold in one hand and enough choices to accommodate most vials and small bottles.Offered in 5 grid configurationsDimensions: 12.8 x 10.5 x 4.3 cm H (5.08 x 4.15 x 1.70")Polypropylene; autoclavable

Burette Clamp – Spring Action

Lab Organization Racks

Academic Chemistry

Firmly holds test-tubes, burettes and other labware in place.Spring action, stainless steel jaws have a flat wing-head screw for tighteningJaws are covered with rubber tubing for increased friction and a soft gripOpening range of 0 to 25 mm (1")Overall clamp length: 22 cm (9")

Burette Clamps – Polypropylene

Lab Organization Racks

Academic Chemistry

Non-corroding clamps have soft rubber pads to hold burettes firmly without scratching.Clamp fits standard 12.5 mm (0.5") support rodsIncludes an adapter to fit narrower 9.5 mm (0.38") rods (support rod not included)Made of chemical resistant polypropyleneAutoclavable at 121 °C (250 °F)Note: 12 per case.

Chromatography Column Holder

Lab Organization Racks

Life Sciences Molecular Biology

Securely holds as many as eight chromatography columns up to 30 mm (1.19") in diameter in or between its flexible loops.Rigid plastic back is mounted on two polyethylene support blocks which slide over support stand rodsTighten the screws to mount the rack at the desired heightRequires two support rods and stands (H18303-0000 sold separately) or can be wall-mounted by removing the support blocks from the back of the unit

Compact Support Stand

Lab Organization Racks

Academic Chemistry

This non-corrosive support stand with stainless steel mounting rod provides modern advantages over metal ring stands.Compact polypropylene base has a smooth surface making cleaning easy; measures 21 x 16 cm (8.25 x 6.25”) x 4.5cmH (1.75”)Provides excellent stability; can be used to support a variety of types of plasticware and labware9.4 mm (3/8”) diameter x 50 cm (19.75”) long stainless steel rod can be mounted at the center or at one end of the baseWeight: 1.95 kg (4.3lb)Autoclavable

Connecting Microcentrifuge Tube Racks

Lab Organization Racks

Academic Lab Maintenance Life Sciences Manufacturing & Quality Control Molecular Biology Pharma & Biotech

Maximize storage and save benchtop space with microcentrifuge tube racks that are stackable when loaded or empty.

Cuvette Rack – No-Wire

Lab Organization Racks

Academic Chemical Analysis Chemistry Industrial & Petro Chem. Life Sciences Molecular Biology

All-polypropylene rack provides gentle no-scratch support for fragile and expensive spectrophotometer cuvettes.Holds forty-two 10 mm light path cuvettes6 x 7 row layoutSteam autoclavable at 121 °C (250 °F)

Cuvette Racks

Lab Organization Racks

Academic Chemical Analysis Chemistry Industrial & Petro Chem. Life Sciences Molecular Biology

These two tier racks support cuvettes with a minimum of physical contact, greatly reducing the chance of damage.Only the corners of the cuvettes touch the racksAccommodate 12 cuvettes of 10 mm light pathWill not scratch quartz cuvettesF18516-0787 features Stack Rack™ interlocking end plates for secure stackingPolypropylene; steam autoclavable at 121 °C (250 °F)

Disposable Polypropylene Pestles & 1.5 mL Tubes

Lab Organization Racks

Academic Cell Biology Cell Culture Lab Maintenance Life Sciences Pharma & Biotech

These autoclavable/disposable plastic pestles are excellent for re-suspending bacterial cells, precipitates of nucleic acids or proteins and pellets of other materials.Supplied with 1.5 mL microcentrifuge tubes of the same shape for optimal grindingLength: 8.5 cm (3.5")Pestles also available without tubes