Flasks & Accessories

“C”-Shape Open Lead Ring Flask Weights with Vikem Vinyl Coating

Flasks & Accessories Plasticware & Accessories

Cell Culture Life Sciences

Lead rings fit neatly around the neck of filtering flasks with side-arm tubing connections without disconnecting the tubing.Stabilizes vessels in water baths or on the benchtopOpen ring; flexible enough to be pulled apart to accommodate a wider vesselCoated with green Vikem® vinyl to protect glasswareAvailable in four diameter/weight combinations

“Wire” Lead Flask Weight with Vikem Vinyl Coating

Flasks & Accessories Plasticware & Accessories

Cell Culture Life Sciences

These lead weights can be coiled into a helix, spiral, cone or any irregular shape to stabilize vessels in a water bath.Flexible; versatileCoil around flasks, thread through handles or loop around bottle necksCoated with chemical resistant red Vikem® vinyl to protect glasswareAvailable in two weights; 30 cm (12") long

Bel-Art Super Glue

Flasks & Accessories Plasticware & Accessories

Academic Chemical Analysis Industrial & Petro Chem. Lab Maintenance Manufacturing & Quality Control Pharma & Biotech

A drop of fast-setting Bel-Art® Super Glue provides an amazingly strong repair or assembly joint.

Cleanware Bottle Brush

Cleaning Supplies & Detergents Disposal & Cleaning Flasks & Accessories Plasticware & Accessories Storage Bottles

Academic Industrial & Petro Chem. Lab Maintenance Manufacturing & Quality Control Materials Testing Pharma & Biotech

Uniquely designed, swiveling pivot head enables thorough cleaning of bottles and flasks including difficult curves and corners.Natural bristles set in wood will not scratch glassSwivel head fits through a 29/42 standard taper neck, or any non-tapered neck with a diameter of 24 mm (1") or largerBrush head is slightly convex, 45 mm (L) x 21 mm (W) with bristles 8 mm longBrush head is attached to hardwood handle 37 cm long x 7 mm diameter

Cup-Type Stoppers

Flasks & Accessories Plasticware & Accessories

Academic Plasticware

These polyethylene cup-type stoppers fit tightly yet remove easily.Double as containers for micro workAll are 26 mm high

Filtering Flask with Side Arm

Flasks & Accessories Plasticware & Accessories

Chemical Analysis Industrial & Petro Chem.

Polypropylene plastic flask has side-arm at 45˚ downward angle to prevent tipping.Arm accepts flexible tubing from 0.38" to 0.5" I.D.

Flaskup Flask Holders

Flasks & Accessories Plasticware & Accessories

Cell Culture Life Sciences

These unique holders are perfect for keeping round and tapered bottom flasks upright.Inside wall has a slight taper to the open bottom; allows a variety of flask shapes and sizes to fit into one holderWide base keeps flasks stableSide slots can be used as sight windowsMolded from polypropylene plastic; durable and easy to cleanAutoclavable at 121 °C (250 °F)

Fluo-Kem Lab-Thread Tape

Flasks & Accessories Plasticware & Accessories

Academic Chemical Analysis Industrial & Petro Chem. Lab Maintenance Manufacturing & Quality Control Pharma & Biotech

Pure, non-sintered Teflon® PTFE Lab-Thread Tape contains no adhesive, yet does a superior job of sealing small apertures.

Fluo-Kem Sleeves with Grip Ring & Outer Ribs

Flasks & Accessories Plasticware & Accessories

Academic Chemical Analysis Chemistry Drug Discovery & Development Industrial & Petro Chem. Pharma & Biotech

Keep standard taper glass joints from seizing, leaking or galling with these reusable Teflon® sleeves.No lubricant required to make a vacuum-tight jointTop of each sleeve has a rigid, knurled grip ring 3 mm (0.1") thick for easy assembly or removal of the sleeve from a standard taper jointOuter rings on the taper prevent stickingResistant to most chemicalsMade of .2 mm (.008") virgin Teflon® PTFEThickness at rings is .35 mm (.014")Can be subjected to temperatures from -100 °C to +250 °C (-148 °F to +482 °F)TEFLON® is a registered trademark of The Chemours Company FC LLC and used under license by Bel-Art Products, Inc.

Microcentrifuge Tube Opener

Flasks & Accessories Pestles, Mortars & Grinders Plasticware & Accessories Sampling Speciality Bottles

Life Sciences Sample Prep & Flow Cytometry

Easily open all sizes of microcentrifuge tubes with this double-ended tool.Opens standard 1.5, 2 and 2.2 mL tubes with one endForked blade on other end opens smaller sizes (250, 400 and 550μL)Dimensions: 7.9 cm (3.13") long

Poxygrid Lead Flask Ring Holder

Flasks & Accessories Plasticware & Accessories

Cell Culture Life Sciences

Wire formed, epoxy coated holder keeps lead ring weights organized and handy.Small footprint; circular base is only 19 cm (7.5") in diameterRings having an inside diameter of 17.8 mm (0.7") or larger stack neatly on a tapered center post (17.1 cm (6.75") high)Steam autoclavable at 121˚C (250˚F)

ProCulture Foil Cover-ALLS

Flasks & Accessories Plasticware & Accessories

Cell Culture Life Sciences

Used in cell culture to cover flasks while allowing proper oxygenation, these economical and disposable covers also provide dust-free storage of clean labware.Provides a temporary, sterile boundary for autoclave sterilization of labwarePreformed to quickly cover a wide variety of labware using only one handGreat for use in centralized washing areas where cleaned labware needs to be transported back to the lab while remaining clean and contaminant-freeAvailable in three sizes

Round Lead Ring Flask Weights with Vikem Vinyl Coating

Flasks & Accessories Plasticware & Accessories

Cell Culture Life Sciences

Protect and stabilize expensive glassware with these Vikem® vinyl coated lead rings.Stabilize glassware immersed in water baths;reduces floating, breakage and chemical spillsBright red Vikem® vinyl coatingChemical-resistantWill not scratch flasksAvailable in five diameter/weight combinations

Round-Bottom Flask Support

Flasks & Accessories Plasticware & Accessories

Cell Culture Life Sciences

Round-bottom flasks of any size up to 10 L are cradled securely in the stepped concentric rings of this holder.Can be stacked together for convenient storagePolypropylene plastic rack; not affected by spilled acids, alkalis or other corrosive liquidsSteam autoclavable at 121 °C (250 °F)

Safe-Lab Hollow Teflon PTFE Stoppers for Tapered Joints

Flasks & Accessories Plasticware & Accessories

Academic Chemical Analysis Chemistry Drug Discovery & Development Industrial & Petro Chem. Pharma & Biotech

Use these hollow Teflon® PTFE stoppers for boiling and distilling flasks with ground joints.Easily removed from standard tapered glassware by turning the red extraction nut to apply a safe, gentle and even force against the mouth of the vesselHelps eliminate accidents and breakageAutoclave safe at 121 °C (250 °F)Note: TEFLON® is a registered trademark of The Chemours Company FC LLC and used under license by Bel-Art Products, Inc.

Safe-Lab Joint Stirrer Bearing for Tapered Joints

Flasks & Accessories Plasticware & Accessories

Academic Chemistry

For use with 10 mm stirring rods, the body is Teflon® PTFE with a Viton® O-ring.Comes complete with two Teflon® PTFE inserts with inside O-ring for fine adjustment of stirring rod tensionThreaded polypropylene locking compression cap on topExtracting nut above the ground joint allows easy and quick removal from flaskNot autoclavableTEFLON® is a registered trademark of The Chemours Company FC LLC and used under license by Bel-Art Products, Inc.

Safe-Lab Joint Tubing Adapters for Tapered Joints

Flasks & Accessories Plasticware & Accessories

Academic Chemistry

Stopper has Teflon® PTFE body with Viton® O-ring.Polypropylene screw cap on top has an inside O-ring for depth adjustment of glass tubingBottom inner joint has a threaded extracting nut for easy removal of adapterNot AutoclavableTEFLON® is a registered trademark of The Chemours Company FC LLC and used under license by Bel-Art Products, Inc.

Safe-Lab Stirrer Bearings for Tapered Joints

Flasks & Accessories Plasticware & Accessories

Academic Chemistry

Stopper-Loc™ Nut allows stirrer bearing to be locked to outer ground joint when stirring viscous materials for long periods of time.Complete with Stopper-Loc™ Nut and two Teflon® PTFE insertsReplacement Teflon® PTFE insert with Viton® O-ring for 10 mm Teflon® PTFE stirrer bearings availableNot autoclavableTEFLON® is a registered trademark of The Chemours Company FC LLC and used under license by Bel-Art Products, Inc.