Skip to content

Industrial & Petro Chem.

Industrial & Petro Chem.
Filter — 416 products shown of 416
Filtered by: Industrial & Petro Chem. — 416 products
“SPACE SAVER” Vacuum Desiccators

“SPACE SAVER” Vacuum Desiccators

Degas liquids quickly and easily in the laboratory or classroom with this small, strong, shatterproof plastic vacuum desiccator that provides dry storage and protection for sensitive products.Lighter and less costly than glass models, and won't chipHolds a full vacuum (29.9" Hg) at room temperature for 24 hoursTapered polypropylene stopcock with PTFE plug allows controlled air entry without turbulenceNeoprene O-ring assures a tight seal down to 0 °C without grease"Flat Dome" clear polycarbonate top provides 13% greater interior volume than standard domes

“5 in 1” Tubing Connectors

“5 in 1” Tubing Connectors

Fits 5 sizes of tubing and will connect the same size tubing on both ends, or will act as a reducer for any combination within the range.Inside diameter increases with notch size when unneeded length is cut off for unrestricted flowMolded polypropylene; steam autoclavable at 121 °C (250 °F)Ring diameters: 14, 12.5, 11, 9.5 and 7.9 mm (0.56, 0.5, 0.44, 0.38 and 0.31")

“T” Shaped Tubing Connectors

“T” Shaped Tubing Connectors

Connectors have multiple barbs per arm providing additional contact between the fitting and the tubing for extra gripping power.Ensures a tight, secure connection between lengths of tubing having the same inner diameter (I.D.)Chemical-resistant polypropylene for use with a wide range of liquids or gasesFDA-grade for direct contact with food, drugs, and cosmeticsAutoclavable

28-Piece Fitting Kit

28-Piece Fitting Kit

Compatible with tubing from 3.2 to 12.7 mm (0.13 to 0.5"), these fittings are for the most common lab connections.Molded of autoclavable FDA grade polypropylene except quick disconnect fittings which are polyethylene and not autoclavable or FDA gradeKit contains: 6 Straight Tubing Connectors, 7 Stepped Tubing Connectors, 5 Wye (Y) Tubing Connectors, 3 "T" shaped Tubing Connectors, 5 Quick Disconnects and 2 flow control Plastic Tubing ClampsPlastic organizer box has room for adding other fittings and parts

Adjustable Handle Water Sample Dipper

Adjustable Handle Water Sample Dipper

For taking samples of water, sewage, wastes and effluents from lakes, streams, tanks, or ponds, the water sample dipper provides a long reach for otherwise inaccessible spots.1000 mL graduated polypropylene plastic pitcher mounted on an aluminum tube handleHandle has 3 parts, a 91 cm (3') lower section, a 112 cm (44”) telescoping section, and an additional 91 cm (3') upper sectionConnections are made with spring buttons with adjusting steps, 15 cm (6”) apartMinimum handle length is 91 cm (3'), maximum length is 274 cm (9')Handle diameter is 2.5 cm (1”) with 2.2 cm (0.88”) telescoping tube

Air Operated Turbine Magnetic Stirrer

Air Operated Turbine Magnetic Stirrer

This compact, small-footprint stirrer only uses 3 to 8 psi (21-55kPa) air pressure and is ideal for stirring vessels up to 1 L.Tubing is supplied to connect to an air supplyAll parts are made from high impact polystyrene; ensures long life and easy clean-up in case of spillsCan be used with magnetic stirring bars up to 2.5 cm (1") in length

Autoclave Safe Bag Clips – Clavies

Autoclave Safe Bag Clips – Clavies

These clips can be opened and closed with one hand to easily and securely close the gathered top of an autoclave bag after it has been filled with wastes.Stiff plastic design holds the bag neck closed while allowing release of internal pressure that can develop during the autoclave cycleAfter autoclaving, the clip is left on the bag for final disposalSuitable for bags ranging in size from 12 x 24” to 19 x 23”, catalog numbers F13160-0009, F13160-0005, F13185-1224, F13164-1419 and F13164-1923; use with larger bags is not advisedClosed internal dimension: 0.44”

Automatic Burettes

Automatic Burettes

These self-zeroing glass burettes have easy to read blue graduations against a white background.Delivery end is fitted into a plastic push button stopcock which permits drop by drop deliverySmall screw clamp adjusts drop speed as needed for titrationPolyethylene filling tube extends from the top of the burette into the bottle reservoirBottle, screw cap and round base are polyethylene plasticGraduation accuracy is Class B

SP Bel-Art is proud to sell through our distribution partners.

Find Yours Today