Skip to content

Materials Testing

Filter — 230 products shown of 230
Filtered by: Materials Testing — 230 products
“SPACE SAVER” Vacuum Desiccators

“SPACE SAVER” Vacuum Desiccators

Degas liquids quickly and easily in the laboratory or classroom with this small, strong, shatterproof plastic vacuum desiccator that provides dry storage and protection for sensitive products.Lighter and less costly than glass models, and won't chipHolds a full vacuum (29.9" Hg) at room temperature for 24 hoursTapered polypropylene stopcock with PTFE plug allows controlled air entry without turbulenceNeoprene O-ring assures a tight seal down to 0 °C without grease"Flat Dome" clear polycarbonate top provides 13% greater interior volume than standard domes

“5 in 1” Tubing Connectors

“5 in 1” Tubing Connectors

Fits 5 sizes of tubing and will connect the same size tubing on both ends, or will act as a reducer for any combination within the range.Inside diameter increases with notch size when unneeded length is cut off for unrestricted flowMolded polypropylene; steam autoclavable at 121 °C (250 °F)Ring diameters: 14, 12.5, 11, 9.5 and 7.9 mm (0.56, 0.5, 0.44, 0.38 and 0.31")

“T” Shaped Tubing Connectors

“T” Shaped Tubing Connectors

Connectors have multiple barbs per arm providing additional contact between the fitting and the tubing for extra gripping power.Ensures a tight, secure connection between lengths of tubing having the same inner diameter (I.D.)Chemical-resistant polypropylene for use with a wide range of liquids or gasesFDA-grade for direct contact with food, drugs, and cosmeticsAutoclavable

28-Piece Fitting Kit

28-Piece Fitting Kit

Compatible with tubing from 3.2 to 12.7 mm (0.13 to 0.5"), these fittings are for the most common lab connections.Molded of autoclavable FDA grade polypropylene except quick disconnect fittings which are polyethylene and not autoclavable or FDA gradeKit contains: 6 Straight Tubing Connectors, 7 Stepped Tubing Connectors, 5 Wye (Y) Tubing Connectors, 3 "T" shaped Tubing Connectors, 5 Quick Disconnects and 2 flow control Plastic Tubing ClampsPlastic organizer box has room for adding other fittings and parts

Adjustable Handle Water Sample Dipper

Adjustable Handle Water Sample Dipper

For taking samples of water, sewage, wastes and effluents from lakes, streams, tanks, or ponds, the water sample dipper provides a long reach for otherwise inaccessible spots.1000 mL graduated polypropylene plastic pitcher mounted on an aluminum tube handleHandle has 3 parts, a 91 cm (3') lower section, a 112 cm (44”) telescoping section, and an additional 91 cm (3') upper sectionConnections are made with spring buttons with adjusting steps, 15 cm (6”) apartMinimum handle length is 91 cm (3'), maximum length is 274 cm (9')Handle diameter is 2.5 cm (1”) with 2.2 cm (0.88”) telescoping tube

Blow-Hard O.S. Extra Dust Remover

Blow-Hard O.S. Extra Dust Remover

Provides powerful blasts of triple filtered air for cleaning laboratory equipment that could be damaged by wiping.Handy extension tube (included) effectively penetrates hard-to-reach placesOzone safe; nonflammableWarning instructions for safe use printed on the canNo Air ShipmentThese products are available only in the United States.

Chromerge Glass Cleaner

Chromerge Glass Cleaner

A highly effective glassware cleaner, Chromerge® leaves surfaces chemically clean, and aids in creating a perfect meniscus.Each bottle (6 per pack) contains 25 mL of chromium trioxide in solutionWhen mixed with a 4.1 kg (9lb) 2.2 L container of sulfuric acid, makes a highly efficient cleanerMixture can be stored and reused until it becomes green, indicating loss of effectivenessNot for use with plasticsNo Air ShipmentThis product for sale in the United States only.

Churn Sample Splitters

Churn Sample Splitters

Provides an efficient method of preparing subsamples of collected water-sediment mixtures from stream flows for water quality analysis.Water-sediment samples are poured in and composited into one representative cross-section sample, then split into 4 to 16 subsamplesPolyethylene sample splitter consists of a thick walled cylindrical vessel with a disc churnCenter handle extends through the cover, with a locating notch to keep it orientedSmall polypropylene spring-loaded spigot drains subsamples into bottles; carrying handle makes transport easyIntended to meet USGS water sampling protocol; lid and spigot are replaceable

Cleanware Bottle Brush

Cleanware Bottle Brush

Uniquely designed, swiveling pivot head enables thorough cleaning of bottles and flasks including difficult curves and corners.Natural bristles set in wood will not scratch glassSwivel head fits through a 29/42 standard taper neck, or any non-tapered neck with a diameter of 24 mm (1") or largerBrush head is slightly convex, 45 mm (L) x 21 mm (W) with bristles 8 mm longBrush head is attached to hardwood handle 37 cm long x 7 mm diameter

Cleanware Glassware Scrubbing Sponge

Cleanware Glassware Scrubbing Sponge

Remove stubborn residue on glassware with this odor-resistant, highly absorbent sponge.Wipe dry performance equal to cellulose; maintains the desirable physical properties of polyurethaneFoam contains anti-microbial technology to inhibit odor causing bacteria within the sponge itselfStays soft and flexible, wet or dry; will not crack or shrink, or become brittle like celluloseScouring side resists snagging; does not leave fibers behind and retains aggressive scouring ability even with frequent use

SP Bel-Art is proud to sell through our distribution partners.

Find Yours Today