Browse All Products

Economy Support Stand

Sturdy and stable support stand has a rust-proof, polycarbonate plastic base with a 46cmH x 7.9 mm dia.

Burette Clamp – Spring Action

Firmly holds test-tubes, burettes and other labware in place.Spring action, stainless steel jaws have a flat wing-head screw for tighteningJaws are covered with rubber tubing for increased friction and a soft gripOpening range of 0 to 25 mm (1")Overall clamp length: 22 cm (9")

Plastic Tubing Clamps

Plastic Tubing Clamps are durable and will not rust or corrode.

Test_002

Test_0001_NN

Lorem ipsum dolor sit amet, consectetur adipiscing elit.

Fabricated Fume Hood

This translucent polypropylene hood is non-conductive, chemical-resistant and corrosion-proof.Clear acrylic sash sets open at three positions from 25 cm (10") to 53 cm (21")Durable 6.4 mm (0.25") thick polypropylene construction with heavier sections where neededFull length 3.2 mm (0.13") interior baffle directs airflow across the table surface and verticallyStack has a 15.2 cm (6") outside diameter with a damper; exhaust system of 500 cfm recommendedOutside dimensions: 122 cm W x 61 cm D x 91 cm H (48 x 24 x 36")Note: Ships by truck, delivered separately; shipping charges included in list price.

Tapered Rear Exhaust Fume Hoods

These corrosion-proof polypropylene exhaust hoods are designed to rest on the rear edge of tanks and draw a stream of air across the top of the tank away from the operator.Draws a stream of air across the top of the tank away from the operatorDesigned to rest on the rear edge of tanks

Large Molded Fume Hood with Baffle

This fume hood is the same as H50000-0003, shown above, but includes a flat internal baffle across the rear of the shell.Internal baffle across the rear of the shell slopes forward, leaving space beneath for air flow to sweep the deck, and space above in order to efficiently remove airborne vaporsSash can be set in an open, closed or intermediate position; remains open slightly when in closed position to facilitate continuous air flowStack O.D.: 15 cm (6")Exhaust system capable of drawing 350 cfm (free air) is recommendedShipping weight 25.5 kg (56 lbs)Note: Overall dimensions are 107 x 51 x 76cmH (42 x 20 x 30").

Large Molded Fume Hood

This fume hood features a one-piece polyethylene shell with a clear acrylic sash that slides on inside tracks.Sash sets open, closed, or intermediate; remains slightly open in closed position for continuous air flowStack O.D.: 15 cm (6"); exhaust system of 350 cfm recommendedFront opening: 88 x 36 cm H (34.5 x 14.19")Overall dimensions: 107 x 51 x 76 cm H (42 x 20 x 30")Shipping weight: 25.5 kg (56 lbs)

Small Molded Benchtop Fume Hood

Designed for small facilities or installations needing multiple fume hoods, this unit is excellent for schools, junior colleges and universities.One-piece chemical resistant polyethylene shell with rounded inside corners for easy cleaningClear acrylic sash slides on a track with stop pins for open, closed, or intermediate positionsStepped exhaust duct accepts 4 or 6" diameter duct; exhaust system of 200 cfm recommendedFront opening: 56 W x 30 cm H (22 x 12")Overall dimensions: 69 x 33 x 56 cm H (27 x 13 x 22"); shipping weight 17 kg (38 lbs)

Clear View Fume Hoods

Safely vent noxious or potentially hazardous fumes and dust using Bel-Art® Clear View Fume Hoods, constructed of clear polycarbonate with a sleek modern style and an unobstructed view into the hood from all sides.Perfect for laboratory, classroom or industrial applications3-position sliding sash can be fully lowered or set at two intermediary heightsTop sitting 6" O.D.

GHS Labeled Right-To-Know, Safety-Vented Wash Bottles

Safety-vented wash bottles provide compliance with the Globally Harmonized System (GHS) and OSHA's HazCom 2012 requirements for "Workplace Labels."Pre-printed with chemical name/formula, GHS pictogram, NFPA diamond, health hazards, CAS number, and protective clothingUnique valve prevents pressure build-up, eliminating drips; dispenses upright or invertedWide mouth 53 mm (2") bottle for easy refillingTranslucent LDPE bottles; color-coded polypropylene closures for identification500 mL - 4/bag, 1000 mL - 2/bag; assortment includes Acetone, Isopropanol, Bleach, and EthanolNote: Methyl Ethyl Ketone and Toluene bottles do not include a vented valve.

Trigger Sprayers w/ 53 mm Adapters

Trigger sprayers with adapters fit any Bel-Art® bottle with an easy to fill, 53 mm wide closure and offer convenient, adjustable spray dispensing of a wide range of chemicals including bleach, ethanol, machine oil and water.Simple to install sprayer is perfect for GHS Labeled safety-vented wash bottles (series 12416 and 12432), as well as OSHA compliant 16oz and 32oz Bel-Art® non-vented, wide-mouth wash bottles (series 11716 and 11732)Stainless steel, spring-action pump in the trigger sprayer will not corrode with repeated exposure to 10% bleach disinfecting solutionMade from durable, chemical resistant polypropyleneAdapter plus trigger sprayer adds approx.

Pipette Jars

Store and soak pipettes in these leakproof, molded polyethylene Pipette Jars.Withstands all common cleaning solutions at room temperature, including sulfuric acid/dichromate

Gas Washing Bottle with Fritware Dispersion Disc

Graduated 250 mL polypropylene cylinder with a stable extended base for use in precipitating elements from gas.Gas is dispersed through a removable fitting that has a coarse grade porosity, polyethylene dispersion discSilicone stopper holds 6.3 mm (0.25") O.D.

Acid/Solvent Bottle Carriers

Polyethylene carriers with epoxy coated, heavy-gauge steel wire bails have wide ribs in both the sides and on the bottom to support and cushion bottles.Cone style lid has a 16 mm (0.63”) opening in the top for insertion of tubing; simplifies the transfer of liquids without pouringTruncated style lid permits pouring without the removal of the lidDesigned to hold standard US reagent bottles

Dispensing Jug

Use this 20 L (5 gallon) jug with molded-in gallon gradations to store and dispense common solutions, including janitorial cleaners, deionized/distilled water, or other aqueous liquids.Gasketed and threaded LDPE spigot extends 125 mm from the jug with a 35 mm dispensing stemGraduations on side and top for viewing volume from any orientationTop opening is 70 mm I.D.

Jerricans with Spigot

These space-saving jerricans have a smooth turning spigot that opens and closes with half a turn for convenient dispensing from a stationary position.High-density polyethylene with a 20 cm (8") long spout and built-in air ventSpout retracts into the threaded collar to conserve space; collar sealed by a leakproof screw capExtra hand grip on the bottom for positive pouring controlExtra headspace for content expansion; graduated in U.S.