Stopcocks
2-Way & 3-Way Connections
With a removable, leak-proof plug made of chemical-resistant, non-stick Teflon® PTFE, these 2- and 3-way polypropylene plastic stopcocks have barbed tubulations that accept 6.4 mm to 9.5 mm (0.25″ to 0.38″) I.D. tubing.
- Three-way models allow connection of any two or all three arms
- Instant cut-off control
- Pressure rating is 240 KPa (35 psi)
- Steam autoclavable at 121 °C (250 °F)
TEFLON® is a registered trademark of The Chemours Company FC LLC and used under license by Bel-Art Products, Inc.
Product Variants
| Catalog No. | Bore Size | Pk/Cs | variant_of | Quantity / Pack | Where to Buy |
|---|---|---|---|---|---|
| F30891-0000 | 4 mm | 6 | Stopcocks | 1 | Find a Distributor |
| F30895-0000 | 4 mm | 6 | Stopcocks | 1 | Find a Distributor |
| F30894-0000 | 2 mm | 6 | Stopcocks | 1 | Find a Distributor |
| F30890-0000 | 2 mm | 6 | Stopcocks | 1 | Find a Distributor |
Discover Related Bel-Art Products
Desi Can Reusable Desiccant Canister
Excellent for use in closets, containers, tool boxes, camera cases and other storage areas to prevent rust and moisture, these canisters contain silica gel to effectively absorb moisture through perforations in the aluminum case.One canister of Reusable Desi-Can™ Canister maintains a safe level of humidity in 0.09 cubic meter (3 cubic ft.) of spaceCan be regenerated in a 150 °C (300 °F) oven in about 3 hours for unlimited lifeMonitor window shows pink when recharged and green when saturated
Economy Pipette Pump III Pipettors
These lightweight pipetting devices are designed for quick and accurate one-handed operation, with an ergonomic design that enhances comfort and helps reduce hand and wrist strain.Allows arm to remain in a more natural, lowered position unlike other pipettorsOptimally located thumb wheel enables a relaxed grip for precision aspirating or dispensing down to single dropsSelf-stabilizing collar inside the silicone chuck holds either glass or plastic pipettesCompact design adds only 15.2 cm (6") to the pipette length, allowing use in fume hoods and glove boxesAvailable in three color-coded volumes; resistant to acids, alkalis, and most solvents
Safe-Lab Joint Stirrer Bearing for Tapered Joints
For use with 10 mm stirring rods, the body is Teflon® PTFE with a Viton® O-ring.Comes complete with two Teflon® PTFE inserts with inside O-ring for fine adjustment of stirring rod tensionThreaded polypropylene locking compression cap on topExtracting nut above the ground joint allows easy and quick removal from flaskNot autoclavableTEFLON® is a registered trademark of The Chemours Company FC LLC and used under license by Bel-Art Products, Inc.
