Skip to content

Pharma & Biotech

Pharma & Biotech
Filter — 532 products shown of 532
Filtered by: Pharma & Biotech — 532 products
ProCulture Cryotube Floating Bubble Rack

ProCulture Cryotube Floating Bubble Rack

This 20 place polypropylene round floating rack fits most cryotubes and holds them tightly in a circular pattern formed by 12 outer and 8 inner openings.Excellent for holding cryotubes during work or incubationFloats in water; can also be used for quickly thawing frozen cells in a 37 °C water bathEasily remove tubes by holding the center handle and pushing the rack down against the bench until the legs touchDimensions: 6.4 mm (0.25") thick; 95 mm (3.75") in diameter; 19 mm (0.75") long legsAutoclavable

ProCulture Micro-Tube Homogenizer System

ProCulture Micro-Tube Homogenizer System

This hand-held, cordless homogenizer features a simple push in / pull out pestle exchange, ideal for thorough and faster processing of one to many samples.Pestles and tubes assure tight tolerances and thorough homogenization, and are chemical and heat resistant, colorant-freeTubes have 25% thicker bottoms than industry standard, with frosted surfaces for labeling and a "snap-cap" sealPestles have a ribbed shaft for precise finger control, and also fit most motorized mixer adaptersManufactured in a class 10,000 cleanroom; certified DNase, RNase and Pyrogen-freeAvailable individually wrapped or bulk packed; homogenizer unit is CE marked

ProCulture Orbital Shaker Platform

ProCulture Orbital Shaker Platform

Perfect for dishes, flasks, and trays, it is also ideal for Western Blot processing.Shake and stir; rotating orbit diameter of 21.7 mmShaker adjustment is controlled by setting the magnetic stirrer to the desired speedPlatform protects the operating mechanism from spills; non-skid surface prevents containers from slidingBase incorporates built-in hand holds for lifting and carryingSupports up to 6.8 kg (15 lb)Note: Magnetic stirrer not included.

ProCulture Round Microcentrifuge Floating Bubble Racks

ProCulture Round Microcentrifuge Floating Bubble Racks

Made especially for use with beakers and waterbaths, these space-saving racks are ideal for small quantities of tubes in cell culture laboratories.Perfect for incubating microtubes in a beaker of waterBuoyant TPX® brand polymethylpentene with tiny bubbles for additional buoyancyInsert tubes from the top; remove by pressing the rack down on the benchWithstands boiling for 30 minutes at 100 °C (212 ºF); steam autoclavable at 121 °C (250 ºF)Leg length 19 mm (3/4"); thickness 6.4 mm (1/4")Note: Available with 10.8 mm holes for 1.5 mL tubes or 7.7 mm holes for 0.5 mL tubes.

ProCulture Stak-A-Tray System

ProCulture Stak-A-Tray System

Modular rack and tray system allows multi-layer storage and prevents tipping of stacked flasks that result in spills.Can be used with Petri dishes and cell culture flasks in incubators, cold rooms or on the benchEach tier accommodates one large or two small traysStack up to five racks for increased storage within the same footprintPerforated trays allow air flow and slide easily in the rackAll parts are stainless steel; autoclavable at 121 °C (250 °F)Note: Racks and trays sold separately.

Pyrex Spinbar® Magnetic Stirring Bars

Pyrex Spinbar® Magnetic Stirring Bars

Pyrex® Spinbar® glass encapsulated Alnico magnet stirring bars are useful for high temperature applications up to 274˚C (525˚F).Completely smooth surface offers “zero absorption”; easy to cleanMeets US Pharmacopoeia specifications for Type I Borosilicate glassManufactured in a registered ISO 9001:2015 facility, as verified by SGS certificationAutoclave safeNote: To avoid breakage, Pyrex glass Stirbars should be carefully placed in the bottom of your stirring vessel and not ‘dropped’.

Quaverette Micro-Blade Vibrating Spatulas

Offers the same features as the Quaver® Vibrating Spatula, but permits utilization of smaller quantities and containers.Narrow V-shaped blade and 21 cm (8.25") length maneuvers easily into small mouth containers and tight cornersAvailable with a plain stainless steel blade or with a brown Fluo-Kem® Teflon® FEP coatingCoating complies with FDA regulations governing direct food contact applications; reduces transfer lossesNote: TEFLON® is a registered trademark of The Chemours Company FC LLC and used under license by Bel-Art Products, Inc.

SP Bel-Art is proud to sell through our distribution partners.

Find Yours Today