Manufacturing & Quality Control

Indexed Racks

Lab Organization Racks

Academic Chemistry Life Sciences Manufacturing & Quality Control Molecular Biology Pharma & Biotech

Round holes with tight tolerances hold 13 mm tubes firmly for accurate processing, reducing lost samples and damage to instruments.Designed for automated liquid handling systems; numbered locations improve programming throughputIdeal when cell identification/location is critical, such as robotic sample processing using multiple racks per unitExcellent for clinical laboratories identifying test tube locations for multiple samplesAvailable in standard or serpentine numbering patterns, silk-screened on topMade of autoclavable white polypropylene; dimensions 25 x 10.5 x 5.6 cm H (9.75 x 4.13 x 2.19")

Instrument Trays with Covers

Lab Organization Trays & Storage

Academic Industrial & Petro Chem. Lab Maintenance Manufacturing & Quality Control Materials Testing Pharma & Biotech

Polypropylene plastic trays, with inset covers, taper gracefully outward toward the top.Smooth, rounded corners allow easy cleaning and sterilizationSteam autoclavable at 121 °C (250 °F)

Iris Port Entry – Glove Box

Dry Storage Gas Purge Desiccators

Academic Industrial & Petro Chem. Lab Maintenance Manufacturing & Quality Control Pharma & Biotech Safety

Allows protected access without the use of long sleeve gloves to any glove box with ?

Jumbo Magnetic Spinbar® Stirring Bar Retriever

Stirbar Accessories Stirring & Mixing

Academic Chemical Analysis Industrial & Petro Chem. Lab Maintenance Manufacturing & Quality Control Pharma & Biotech

This flexible PTFE magnetic retriever will remove the largest magnetic stirring bars from deep vessels.Easy grip “T” handle has overall length of 65 cm (26”)Powerful Alnico 5 magnetic end; 10.2 x 1 cm diameter (4 x 0.38")Longer, custom lengths are available

Lab Drawer Compartment Trays

Lab Organization Trays & Storage

Academic Industrial & Petro Chem. Lab Maintenance Manufacturing & Quality Control Materials Testing Pharma & Biotech

These white polystyrene plastic trays measure 36 x 44.5 x 5.7cmH (14 x 17.5 x 2.25”) and fit standard lab bench drawers.Practical and functional solution for organizing the “stuff” of daily lab lifeVarious configurations to accommodate thermometers, medication cups, jars, stir bars, vials, and/or pipettes

Lab-Aire II Electric Benchtop Glassware Dryers

Cleaning Supplies & Detergents Disposal & Cleaning

Academic Industrial & Petro Chem. Lab Maintenance Manufacturing & Quality Control Materials Testing Pharma & Biotech

Lab-Aire® II Electric Drying Racks accelerate drying of labware with warm, circulating air while their compact footprint uses minimal benchtop space.400 watts of drying power gently circulates heated air into and around items to decrease drying timeHeat selector knob allows choice of three temperature settings: high, medium and lowSmall (3"), medium (4") and large (5") pegs can be moved and repositioned to hold beakers, flasks, bottles, test tubes and cylindersChoose a single-sided model to fit against a wall, or double your capacity with a double-sided modelRugged ABS plastic will never corrode and easily wipes cleanNote: 230V models are CE marked.

Lab-Aire II Non-Electric Benchtop Glassware Dryers

Cleaning Supplies & Detergents Disposal & Cleaning

Academic Industrial & Petro Chem. Lab Maintenance Manufacturing & Quality Control Materials Testing Pharma & Biotech

The small footprint of the Bel-Art® Lab-Aire® II Drying Racks is a practical solution for drying and storing fragile, frequently used labware.Rugged ABS plastic will never corrode and easily wipes cleanDrip/storage trays have scalloped wells to hold long thin labwareSmall, medium, and large pegs reposition to hold beakers, flasks, bottles, test tubes and cylindersSingle-sided model fits against a wall for economy of spaceDouble-sided model doubles capacity with minimal increase in footprint

Lab-Aire II Non-Electric Wallmount Glassware Dryers

Cleaning Supplies & Detergents Disposal & Cleaning

Academic Industrial & Petro Chem. Lab Maintenance Manufacturing & Quality Control Materials Testing Pharma & Biotech

Laboratory space is always in high demand making the small footprint of the Bel-Art® Lab-Aire® II Drying Racks a practical solution for drying and storing fragile, frequently used labware.

Label-Off Label Remover – Cleanware

Cleaning Supplies & Detergents Disposal & Cleaning

Academic Industrial & Petro Chem. Lab Maintenance Manufacturing & Quality Control Materials Testing Pharma & Biotech

Quickly removes labels including the gummy residue other cleaners leave behind.Kit contains 59 mL (2oz.) of label adhesive solvent in a pump spray with cap, and 20 lint-free, 10.2 cm (4") square wipesNote: No Air Shipment

LabLens Liquid

PPE & Accessories Safety

Academic Industrial & Petro Chem. Manufacturing & Quality Control Pharma & Biotech Safety Spill Protection

Lens cleaning solution in a 473 mL (1 pint) polyethylene bottle with spray pump.Bottle contains a non-silicone fluidProtects, polishes, anti-stats, and anti-fogs glass and plastic lensesThese products are available only in the United States.

Labmat Bench Liner Rolls & Sheets

Safety Spill Containment

Academic Industrial & Petro Chem. Manufacturing & Quality Control Pharma & Biotech Safety Spill Protection

Disposable Labmat™ Bench Liner speeds clean-up and safeguards work surfaces from stains, spills and wear.Highly absorbent upper surface traps up to 420 mL/m² of water, dyes, corrosive chemicals or radioactive solutionsFlexible polyethylene film backing is non-skid and prevents soak-through of most solutionsAvailable in 50.8 cm (20") wide by 15.2 m (50 ft.) rolls, or 50.8 x 61 cm (20 x 24") pre-cut sheetsRolls are easily cut with the Bel-Art Safety Cutter® (F21012-0000) or scissors while roll is retained in dispenserNote: Simply roll up and discard after contamination.

Large Molded Fume Hood

Fume Hoods Safety

Academic Industrial & Petro Chem. Manufacturing & Quality Control Pharma & Biotech Safety Spill Protection

This fume hood features a one-piece polyethylene shell with a clear acrylic sash that slides on inside tracks.Sash sets open, closed, or intermediate; remains slightly open in closed position for continuous air flowStack O.D.: 15 cm (6"); exhaust system of 350 cfm recommendedFront opening: 88 x 36 cm H (34.5 x 14.19")Overall dimensions: 107 x 51 x 76 cm H (42 x 20 x 30")Shipping weight: 25.5 kg (56 lbs)

Large Molded Fume Hood with Baffle

Fume Hoods Safety

Academic Industrial & Petro Chem. Manufacturing & Quality Control Pharma & Biotech Safety Spill Protection

This fume hood is the same as H50000-0003, shown above, but includes a flat internal baffle across the rear of the shell.Internal baffle across the rear of the shell slopes forward, leaving space beneath for air flow to sweep the deck, and space above in order to efficiently remove airborne vaporsSash can be set in an open, closed or intermediate position; remains open slightly when in closed position to facilitate continuous air flowStack O.D.: 15 cm (6")Exhaust system capable of drawing 350 cfm (free air) is recommendedShipping weight 25.5 kg (56 lbs)Note: Overall dimensions are 107 x 51 x 76cmH (42 x 20 x 30").

Large Powder Funnel

Funnels & Filters Liquid Handling

Academic Chemical Analysis Chemistry Industrial & Petro Chem. Manufacturing & Quality Control Pharma & Biotech

High density polyethylene funnel is ideal for powders and general use.Extra wide 1.5“ stem exit allows for extra coarse or clumping powders to easily passExceptional chemical resistance to most acids, alkalis and some organic solvents

Large Weighted Safety Shields

Fume Hoods PPE & Accessories Safety

Academic Industrial & Petro Chem. Manufacturing & Quality Control Pharma & Biotech Safety Spill Protection

Personnel are protected by a 4.7 mm (0.19") thick, clear polycarbonate barrier with exceptional impact resistance and optical clarity.Shields meet High Mass Impact Test and High Velocity Impact Test as defined by ANSI Z87.1, sections 9.11 and 9.12, respectivelyStable, three-sided construction provides front and side protection against flying debrisHeavy steel base is coated with blue epoxyPlated steel bolts, nuts and washers are used for assembly ensuring long life and rust-resistanceNote: Outside base dimensions are 50cmW x 17cmD (19.5 x 6.5").

Lattice Support Stand

Lab Organization Racks

Academic Chemistry Life Sciences Manufacturing & Quality Control Molecular Biology Pharma & Biotech

The Lattice Support Stand has an extended base and three, evenly spaced, rigid aluminum support rods to provide maximum capacity of small lightweight items such as glassware, as well as heavy items such as mechanical stirrers.Weighted polypropylene base is excellent for use in severe corrosive conditions; stain resistant; provides maximum stabilityThree solid aluminum rods are securely screwed into the base; will not wear with everyday use of clampsHorizontal rods sold separatelyIdeal for use with Bel-Art Clamps (H18354-0000 and H18350-0000)

Leveling Base Kit

Flowmeters & Indicators Safety

Environmental Monitoring Industrial & Petro Chem. Manufacturing & Quality Control Pharma & Biotech Safety

This leveling base assures that the flowmeter is exactly vertical, eliminating error caused by friction between the float and the flow tube.15.2 cm (6 in.) Plexiglas triangular baseThree adjustable feetVial levelFor use with Riteflow mounted flowmeters

Leveling Table

Lab Organization Trays & Storage

Academic Chemistry Industrial & Petro Chem. Manufacturing & Quality Control Materials Testing Pharma & Biotech

This clear acrylic level surface helps in pouring immunological plates, horizontal agarose gels and acrylamide sequencing gels.Each leg is adjustableInset leveling bulb below the working surface assists in accurate adjustmentRigid platform is 20.3 x 20.3 x .95 cm thick (8 x 8 x 0.38")