Skip to content

Cell Culture

Filter — 93 products shown of 93
Filtered by: Cell Culture — 93 products
ProCulture Foil Cover-ALLS

ProCulture Foil Cover-ALLS

Used in cell culture to cover flasks while allowing proper oxygenation, these economical and disposable covers also provide dust-free storage of clean labware.Provides a temporary, sterile boundary for autoclave sterilization of labwarePreformed to quickly cover a wide variety of labware using only one handGreat for use in centralized washing areas where cleaned labware needs to be transported back to the lab while remaining clean and contaminant-freeAvailable in three sizes

ProCulture Stak-A-Tray System

ProCulture Stak-A-Tray System

Modular rack and tray system allows multi-layer storage and prevents tipping of stacked flasks that result in spills.Can be used with Petri dishes and cell culture flasks in incubators, cold rooms or on the benchEach tier accommodates one large or two small traysStack up to five racks for increased storage within the same footprintPerforated trays allow air flow and slide easily in the rackAll parts are stainless steel; autoclavable at 121 °C (250 °F)Note: Racks and trays sold separately.

Stackable Petri Dish Incubation Tray

Stackable Petri Dish Incubation Tray

Increases overall capacity of your incubator by holding five 100 mm diameter or fifteen 60 mm diameter Petri dishes.Each tray includes two large label areas for critical sample identification by marker or labelHoles in tray bottom facilitate air flowPolypropylene plastic; can be disinfected with 70% ethanol or common laboratory disinfectantsNot recommended above 100 °C (212 °F); autoclaving may warp

Straining Baskets

Perforated baskets made from polyethylene plastic allow rapid filling and draining, and are handy for batch rinsing and transporting labware as well as straining or filtering large particles.Chemically resistant; withstand acids and alkalisService temperature up to 82 °C (180 °F)Perforations are 2 mm (0.080")Strap handle rises 10 cm (4") above the rim

Switch-Grid Test Tube Racks

Switch-Grid Test Tube Racks

This innovative, split-frame Switch-Grid™ rack holds up to two different size tubes in the same rack and allows users to quickly switch grids as needed.10 mm to 30 mm diameter test tubes fit in 5 color coded grid insertsThree tier rack holds tubes securely; rubber feet prevent sliding and enable secure stackingChemical resistant polyoxymethylene plastic can be cleaned with mild detergent, ethanol, or autoclaved at 121 °C (250 ºF)More compact and less expensive than purchasing multiple racksRack frame overall dimensions: 31.8 L x 11.1 W x 6.7 cm H (12.5 x 4.38 x 2.63")

Vacuum Aspirator Bottles

For effortless, continuous vacuum aspiration of a variety of liquids, including tissue culture media, supernatants, and chemical wastes.Heavy-wall polypropylene collection bottle is chemical and corrosion resistantTrap protects the vacuum source from overflowContained in a compact epoxy-coated steel frame that will not crowd the workspaceScrew cap contains a safety release vent to prevent vacuum implosionUV inhibitors allow safe exposure to UV sterilization; bottle and cap are autoclavable

Vacuum Aspirator Collection Systems, 1.0 Gallon Bottle with Pump

Vacuum Aspirator Collection Systems, 1.0 Gallon Bottle with Pump

This compact, portable system is ideal for vacuum aspiration of tissue culture media, supernatants, and chemical wastes, available with the original strength or HiFlow pump.Self-contained system with 1.0 gallon bottle, tubing and vacuum pump; lightweight, compact, easy to usePractical when house vacuum is absent or not working; built-in, maintenance free pumpHiFlow model has a stronger flow rate for up to 8 channels, with quick disconnects for easy bottle removalChemical and corrosion resistant polypropylene bottle with a safety release vent; low noise level (76 dB or less)Collection bottle, lid, tubing and connectors are autoclavable at 121 °C; 110/120V UL listed

SP Bel-Art is proud to sell through our distribution partners.

Find Yours Today