Skip to content

Industrial & Petro Chem.

Industrial & Petro Chem.
Filter — 416 products shown of 416
Filtered by: Industrial & Petro Chem. — 416 products
Self Adhesive Waste Bags – Cleanware

Self Adhesive Waste Bags – Cleanware

Disposable waste bags free bench or hood space when hung from walls, cabinets or virtually anywhere.Peel backing off the adhesive strip across the top and hang close to your work areaBack panel is longer than the front for easy openingHigh Molecular Weight High Density (HMHD) polyethylene; steam autoclavable at 121 °C (250 °F)Pass ASTM 1709 Dart Impact and ASTM 1922 Tear Resistance TestsMaximum weight of contents should not exceed 1.36 kg (3lb)

SidENTRY Glove Box

SidENTRY Glove Box

Small enough to move wherever it’s needed, the sidENTRY™ Glove Box features a large side entry door for placing material or equipment into the box.Four adjustable levelers ensure glove box stability and levelingGas purging of the glove box is possible via the supplied and easily assembled stopcockHand entry through the 8” circular ports is customized to end user needs by selecting either the bellows type glove, economy sleeved glove, seamless sleeved glove or the iris port (H50025-0020), all sold separatelyMade of 6.35 mm (0.25”) clear acrylicIncludes removable acrylic rack to hold pipettes and supplies

Silicone Loop Ties

Silicone Loop Ties

Use these adjustable “rubber bands” for bundling, binding, color coding, securing columns and burettes, controlling flexible tubing, keeping foil covers on canisters, and securing dialysis or biohazard bags.Remain flexible from -46 °C to 121 °C (-50 °F to 250 °F); use in the autoclave or freezerSmall, tension-control band slides for a loop range of 5 mm (0.2") to 100 mm (4") in diameterPerfect for use with Fillpour™ Dialysis Tube Funnels (F14848-0000 and F14848-0001)Includes 10 of each color, red, blue and yellow

Sink Traps – McAlpine

Sink Traps – McAlpine

ABS drain traps withstand frost, boiling water, detergents and chemicalsIncludes PVC plug, strainer, waste body, waste fitting, back nut, sealing cup and compression for copper tubingWaste section at top consists of a threaded body with PVC plug, washer and nutRequires no special tools for installation or maintenanceAvailable in 3.8 cm(1.5") size only

Small Molded Benchtop Fume Hood

Small Molded Benchtop Fume Hood

Designed for small facilities or installations needing multiple fume hoods, this unit is excellent for schools, junior colleges and universities.One-piece chemical resistant polyethylene shell with rounded inside corners for easy cleaningClear acrylic sash slides on a track with stop pins for open, closed, or intermediate positionsStepped exhaust duct accepts 4 or 6" diameter duct; exhaust system of 200 cfm recommendedFront opening: 56 W x 30 cm H (22 x 12")Overall dimensions: 69 x 33 x 56 cm H (27 x 13 x 22"); shipping weight 17 kg (38 lbs)

Small Orifice Cleaner – SMORC

Small Orifice Cleaner – SMORC

Uniquely designed for cleaning and uncloging small orifices, a pin vise securely holds a stainless steel cleaning wire in place.2.2 cm (0.88") diameter ring magnet on the handle is useful for picking up wires and for preventing the unit from rolling on metal surfacesLength without wire is 10.2 cm (4")Includes F38126-0000 wire assortment; stores conveniently inside the hollow handleWire assortment contains 30 stainless steel wires, 5.1 cm (2") long, packaged in a plastic vial; 10 each of 3 sizes: 0.152, 0.254, 0.508 mm (0.006, 0.010, 0.020")

Soap & Bleach Wash Bottles – Wide-Mouth, Safety-Labeled

Safety-labeled bottles have color coded caps to aid in quick and easy identification.Easy-to-read 4 color printed bottlesLeak-proof cap; 53 mm (2") wide mouthLDPE; solvent resistantInclude: Department of Transportation (DOT) and National Fire Protection Association (NFPA) codes and symbols, Chemical Abstract Service (CAS) numbers, protective equipment symbols and target organ informationProvides compliance with OSHA requirements outlined in Hazard Communication Standard 29 CFR 1910.1200

Spinbar® Flexible Magnetic Stirring Bar Retrievers

Spinbar® Flexible Magnetic Stirring Bar Retrievers

Flexible, Teflon® rod with a powerful Alnico Teflon® coated magnet for retrieving magnetic stirring bars from containers or non-magnetic sink drains and traps.Available in four colors, two magnet sizesFlexible white rod is 33 cm (13") longAutoclavableTEFLON® is a registered trademark of The Chemours Company FC LLC and used under license by Bel-Art Products, Inc.

Spinbar® Magnetic Stirring Bar Garage

Spinbar® Magnetic Stirring Bar Garage

Keep all your magnetic stirring bars and accessories organized and accessible with the Spinbar® Magnetic Stirring Bar Garage, which holds bars from large 15.9 cm (6") to tiny 10 mm (0.5").Store stirring bars in pairs, with the north pole of one adjoining the south pole of the other, to avoid demagnetizationTight wire spacing on the upper section holds small bars; wider spacing below holds larger barsLower wire shelf is ideal for holding small lab tools, including the Spinbar® Restrainer (F37786-1000)Epoxy coated for long life and easy cleaningFreestanding, or can be mounted to a vertical surface (mounting hardware not included)

Spinbar® Magnetic Stirring Bar Restrainer

Spinbar® Magnetic Stirring Bar Restrainer

The Spinbar® Magnetic Stirring Bar Restrainer secures a stirring bar while decanting liquids.Confined stirring bar can be retrieved from the container without contaminating the solution after the vessel is drainedRestrains magnetic stirring bars up to 80 mm (3") longUnique handle provides an ergonomic, easy to hold grip

Spinbar® Magnetic Stirring Bar Sink Strainer

Spinbar® Magnetic Stirring Bar Sink Strainer

Keep all your magnetic stirring bars and accessories organized and accessible with the Spinbar® Magnetic Stirring Bar Sink Strainer.Four strong magnets attract and hold stir barsFour legs on the underside prevent the strainer from being dislodged by flowing liquidLong slits in the sides and skirt allow fluids to drain rapidlyWide skirt allows use in a variety of sink drainsFlexible and chemical-resistant; available in blue or green

Spinbox Magnetic Stirring Bar Assortments

Spinbox Magnetic Stirring Bar Assortments

These stirbar assortments come in a convenient storage box and provide instant availability of these highly popular Teflon® PTFE encapsulated Alnico magnets.Choose from Octagon, Cylindrical, Polygon, Micro, Egg-Shaped or Spinplus® shaped assortmentsFDA Grade, USP Class VI Teflon® PTFE low friction coating – Superior Chemical CompatibilityManufactured in a registered ISO 9001:2015 facility, as verified by SGS certificationAutoclavableTEFLON® is a registered trademark of The Chemours Company FC LLC and used under license by Bel-Art Products, Inc.

SP Bel-Art is proud to sell through our distribution partners.

Find Yours Today