Food & Beverage

Sample Vials with Captive Closure

Plasticware & Accessories Speciality Bottles

Drug Discovery & Development Food & Beverage Life Sciences Pharma & Biotech Sample Prep & Flow Cytometry Sampling & Prep (FDA)

Cylindrical, low-density PE vials with friction-fit, captive closures open and close with a flick of your thumb.Open and close with a flick of your thumbExcellent for storage of liquids as well as for storing and shipping dry materials

Sampler Syringe

Liquid Samplers Sampling

Environmental Monitoring Food & Beverage Industrial & Petro Chem. Materials Testing Water Testing

Sample liquids quickly and easily: simply squeeze the bulb, submerse the syringe in liquid, and release the bulb to draw liquid in.Can be inverted to contain liquid in the graduated bulbLow-density polyethylene squeeze bulb, graduated in 5 mL increments with 100 mL maximum capacityGraduated polypropylene syringe holds 30 mL (1 oz)Manufactured with FDA grade materials; reusable, unscrews from bulb for easy cleaningOverall length 30 cm (11.75")Note: Not recommended for use with liquids above 80 °C (176 °F).

Scrapers

Sampling Solid Samplers

Academic Food & Beverage Industrial & Petro Chem. Lab Maintenance Materials Testing Sampling & Prep (FDA)

Smooth, chemical-resistant plastic scrapers are useful for removing residues from filters, cleaning containers, mixing and distributing solids in fluids, spreading pastes over large areas, and many other scraping, spreading, stirring or residue removing tasks.Blade dimensions: 12.7cmW (5”) x 15.2cmL (6”)Tapers from 9.5 mm (0.38”) down to a chisel edgeUpper end extends into a hexagonal shank 35 mm (1.38”) wideAvailable in white, FDA grade LDPE (or red HDPE)

Screw Cap Jars

Plasticware & Accessories Storage Bottles

Academic Bioprocessing Support Food & Beverage Pharma & Biotech Plasticware Sampling & Prep (FDA)

White polypropylene jars and screw caps in an assortment of sizes are FDA approved and are excellent for storage of liquid or dry stock, or for use with samples.Jars are autoclavable at 121 °C (250 °F)Screw caps, with PE foam lining, are not autoclavable

Sink Traps – McAlpine

Disposal & Cleaning Disposal Cans & Cartons

Academic Food & Beverage Industrial & Petro Chem. Lab Maintenance Safety Water Testing

ABS drain traps withstand frost, boiling water, detergents and chemicalsIncludes PVC plug, strainer, waste body, waste fitting, back nut, sealing cup and compression for copper tubingWaste section at top consists of a threaded body with PVC plug, washer and nutRequires no special tools for installation or maintenanceAvailable in 3.8 cm(1.5") size only

Small Pails

Disposal & Cleaning Disposal Cans & Cartons

Academic Food & Beverage Industrial & Petro Chem. Lab Maintenance Materials Testing Sampling & Prep (FDA)

These 7.6 L (8qt) plastic pails are available in polyethylene or autoclavable polypropylene.Include snug fitting lid, removable plated steel support ring and bail handleBucket height: 25 cm (10"), 20 cm (8") I.D.

Snap Cap Vials

Plasticware & Accessories Speciality Bottles

Drug Discovery & Development Food & Beverage Life Sciences Pharma & Biotech Sample Prep & Flow Cytometry Sampling & Prep (FDA)

Constructed of glass-clear styrene for complete visibility, these vials are excellent for storing dry materials, powders, tablets, and other samples.Heavy, rigid-wall construction ensures long serviceCan be used at temperatures from -20 to 70 °C (-4 to 158 °F)Supplied with tight-fitting, polyethylene snap-on capsAvailable in nine (9) sizes from 3 dram (11 mL) through 40 dram (148 mL)

Soap & Bleach Wash Bottles – Wide-Mouth, Safety-Labeled

Plasticware & Accessories Wash Bottles

Academic Contamination Testing Food & Beverage Industrial & Petro Chem. Lab Maintenance Safety

Safety-labeled bottles have color coded caps to aid in quick and easy identification.Easy-to-read 4 color printed bottlesLeak-proof cap; 53 mm (2") wide mouthLDPE; solvent resistantInclude: Department of Transportation (DOT) and National Fire Protection Association (NFPA) codes and symbols, Chemical Abstract Service (CAS) numbers, protective equipment symbols and target organ informationProvides compliance with OSHA requirements outlined in Hazard Communication Standard 29 CFR 1910.1200

Spill Containment Tray

Safety Spill Containment

Academic Contamination Testing Food & Beverage Industrial & Petro Chem. Safety Spill Protection

The polystyrene plastic tray protects laboratory benches.Accepts F24675-0020 Labmat™ Sheets as liners (not included) to absorb spilled liquids12.7 mm (0.5") deep with an external flange

Spill Containment Tray with Grid

Safety Spill Containment

Academic Contamination Testing Food & Beverage Industrial & Petro Chem. Safety Spill Protection

This large, deep, polypropylene plastic tray protects users by capturing accidental hazardous spills.Epoxy coated wire support grid holds numerous vessels or racks of test tubesBoth tray and support grid have outstanding chemical resistanceSteam autoclavable at 121 °C (250 °F)

Stackable Petri Dish Incubation Tray

Sampling Sterile Samplers

Cell Culture Food & Beverage Life Sciences Manufacturing & Quality Control Microbiology Pharma & Biotech

Increases overall capacity of your incubator by holding five 100 mm diameter or fifteen 60 mm diameter Petri dishes.Each tray includes two large label areas for critical sample identification by marker or labelHoles in tray bottom facilitate air flowPolypropylene plastic; can be disinfected with 70% ethanol or common laboratory disinfectantsNot recommended above 100 °C (212 °F); autoclaving may warp

Stainless Steel Balance Spoons

Sampling Scoops & Spoons

Drug Discovery & Development Food & Beverage Industrial & Petro Chem. Materials Testing Pharma & Biotech Sampling & Prep (FDA)

Easily transfer small quantities of materials with this trough-style spoon.Available in plain, polished stainless steel or with Teflon® FEP coating17 cm (6.7") length useful for reaching into containersSquare trough-type spoon end: 44 x 8.9 mm (1.75 x 0.35")TEFLON® is a registered trademark of The Chemours Company FC LLC and used under license by Bel-Art Products, Inc.

Stainless Steel Coated Lab Spoon & Spatula

Sampling Scoops & Spoons

Drug Discovery & Development Food & Beverage Industrial & Petro Chem. Materials Testing Pharma & Biotech Sampling & Prep (FDA)

Stainless steel spoon and spatula ends are coated with brown, Fluo-Kem® Teflon® FEP.Fluo-Kem® Teflon® FEP coating complies with FDA regulations governing direct food, drug and cosmetic contact4 mm (0.16") diameter rod is flattened at one end to give an 8 x 51 mm (0.31 x 2") spatulaOpposite end is a 13 x 25 mm (0.5 x 1") spoonNote: TEFLON® is a registered trademark of The Chemours Company FC LLC and used under license by Bel-Art Products, Inc.

Stainless Steel Economy Scoops

Sampling Scoops & Spoons

Drug Discovery & Development Food & Beverage Industrial & Petro Chem. Materials Testing Pharma & Biotech Sampling & Prep (FDA)

Low-cost, sturdy scoop ideal for general laboratory use with high sides to prevent spillage.Reusable, high-quality scoops help reduce laboratory wasteHelps meet sustainability goals when used in place of disposable scoopsUseful in applications with limited salt exposure304 grade stainless steelAutoclavable

Stainless Steel Lab Spoon & Spatula

Sampling Scoops & Spoons

Drug Discovery & Development Food & Beverage Industrial & Petro Chem. Materials Testing Pharma & Biotech Sampling & Prep (FDA)

Large stainless steel lab spoon has a long handle for reaching into larger bottles.Flat spatula end measures 3.1 cm (1.25”) wideSpoon end is 3.7 cm (1.5”) wide and holds 5 mLConnecting bar is 14 mm (0.5”) wide

Stainless Steel Pharma Scoops

Sampling Scoops & Spoons

Drug Discovery & Development Food & Beverage Industrial & Petro Chem. Materials Testing Pharma & Biotech Sampling & Prep (FDA)

These reusable, high-quality scoops can be used time and time again for powder and granule handling in pharmaceutical and food handling settings.Pharmaceutical 316 grade stainless steelEasy to clean seamless design helps prevent cross-contaminationHigh salt and acid resistance, ideal for food samplingHelps meet sustainability goals when used in place of disposable scoopsGMP compliant, autoclavable

Stainless Steel Spoons

Sampling Scoops & Spoons

Drug Discovery & Development Food & Beverage Industrial & Petro Chem. Materials Testing Pharma & Biotech Sampling & Prep (FDA)

These double-ended, 304 stainless steel sampling spoons have a solid, rounded shaft.Available in plain polished stainless steel or coated with Fluo-Kem® Teflon® FEPFEP complies with FDA regulations governing direct food contact applicationsTEFLON® is a registered trademark of The Chemours Company FC LLC and used under license by Bel-Art Products, Inc.

Sterile Cloning Cylinders

Sampling Sterile Samplers

Cell Culture Food & Beverage Life Sciences Manufacturing & Quality Control Microbiology Pharma & Biotech

These cloning cylinders facilitate the isolation of individual cell clones, each generated from a single cell, yielding a homogenous population of cells.