Skip to content

Lab Maintenance

Filter — 201 products shown of 201
Filtered by: Lab Maintenance — 201 products
Sink Traps – McAlpine

Sink Traps – McAlpine

ABS drain traps withstand frost, boiling water, detergents and chemicalsIncludes PVC plug, strainer, waste body, waste fitting, back nut, sealing cup and compression for copper tubingWaste section at top consists of a threaded body with PVC plug, washer and nutRequires no special tools for installation or maintenanceAvailable in 3.8 cm(1.5") size only

Small Orifice Cleaner – SMORC

Small Orifice Cleaner – SMORC

Uniquely designed for cleaning and uncloging small orifices, a pin vise securely holds a stainless steel cleaning wire in place.2.2 cm (0.88") diameter ring magnet on the handle is useful for picking up wires and for preventing the unit from rolling on metal surfacesLength without wire is 10.2 cm (4")Includes F38126-0000 wire assortment; stores conveniently inside the hollow handleWire assortment contains 30 stainless steel wires, 5.1 cm (2") long, packaged in a plastic vial; 10 each of 3 sizes: 0.152, 0.254, 0.508 mm (0.006, 0.010, 0.020")

Soap & Bleach Wash Bottles – Wide-Mouth, Safety-Labeled

Safety-labeled bottles have color coded caps to aid in quick and easy identification.Easy-to-read 4 color printed bottlesLeak-proof cap; 53 mm (2") wide mouthLDPE; solvent resistantInclude: Department of Transportation (DOT) and National Fire Protection Association (NFPA) codes and symbols, Chemical Abstract Service (CAS) numbers, protective equipment symbols and target organ informationProvides compliance with OSHA requirements outlined in Hazard Communication Standard 29 CFR 1910.1200

Solvent-Based Paint Pen Markers

Solvent-Based Paint Pen Markers

Writes on all plastics, glass, metal, wood, paper and cloth, including Teflon® fluoropolymer resins.Precision seal valve provides smooth ink flow and preserves the pen’s life, even if left uncappedWhen dry, the solvent based ink is temperature resistant from 0 °C to 155 °C (32 °F to 310 °F)Markings are insoluble in water or hydrocarbonsResists many solvents, but is easily removed with alcohol or acetoneTEFLON® is a registered trademark of The Chemours Company FC LLC and used under license by Bel-Art Products, Inc.

Spill Containment Trays

Spill Containment Trays

Capturing hazardous chemical and contaminant spills when transferring from one vessel to another is easy with these portable spill containment trays.Large tray has a spill surface that will support multiple flasks, beakers or a rack of test tubesSmaller tray is ideal for smaller vessels and tight spacesCan also be used for storing hazardous, corrosive chemicals, stains, etc.

Spinbar® Flexible Magnetic Stirring Bar Retrievers

Spinbar® Flexible Magnetic Stirring Bar Retrievers

Flexible, Teflon® rod with a powerful Alnico Teflon® coated magnet for retrieving magnetic stirring bars from containers or non-magnetic sink drains and traps.Available in four colors, two magnet sizesFlexible white rod is 33 cm (13") longAutoclavableTEFLON® is a registered trademark of The Chemours Company FC LLC and used under license by Bel-Art Products, Inc.

Spinbar® Magnetic Stirring Bar Garage

Spinbar® Magnetic Stirring Bar Garage

Keep all your magnetic stirring bars and accessories organized and accessible with the Spinbar® Magnetic Stirring Bar Garage, which holds bars from large 15.9 cm (6") to tiny 10 mm (0.5").Store stirring bars in pairs, with the north pole of one adjoining the south pole of the other, to avoid demagnetizationTight wire spacing on the upper section holds small bars; wider spacing below holds larger barsLower wire shelf is ideal for holding small lab tools, including the Spinbar® Restrainer (F37786-1000)Epoxy coated for long life and easy cleaningFreestanding, or can be mounted to a vertical surface (mounting hardware not included)

Spinbar® Magnetic Stirring Bar Restrainer

Spinbar® Magnetic Stirring Bar Restrainer

The Spinbar® Magnetic Stirring Bar Restrainer secures a stirring bar while decanting liquids.Confined stirring bar can be retrieved from the container without contaminating the solution after the vessel is drainedRestrains magnetic stirring bars up to 80 mm (3") longUnique handle provides an ergonomic, easy to hold grip

Spinbar® Magnetic Stirring Bar Sink Strainer

Spinbar® Magnetic Stirring Bar Sink Strainer

Keep all your magnetic stirring bars and accessories organized and accessible with the Spinbar® Magnetic Stirring Bar Sink Strainer.Four strong magnets attract and hold stir barsFour legs on the underside prevent the strainer from being dislodged by flowing liquidLong slits in the sides and skirt allow fluids to drain rapidlyWide skirt allows use in a variety of sink drainsFlexible and chemical-resistant; available in blue or green

Stainless Steel Clamping Thermometer Holder

Stainless Steel Clamping Thermometer Holder

With five hole sizes ranging from 3.5 mm to 14.5 mm, this holder accommodates various thermometers including liquid in glass, electronic with probe, and bimetal with probe.Stainless steel, spring loaded clip attaches securely to laboratory containers, shelves up to 3/8” thick, and moreRubber bumpers on clip prevent scratchingDurable polyurethane foam provides secure grip to keep thermometers in place

Sterileware Triangular Scraper

Sterileware Triangular Scraper

These sterile, plastic scrapers are perfect for cutting, cleaning and general scraping.Ideal for use in the manufacture and quality assurance of creams, ointments and pastesMade from FDA and EU conforming materials; safe for food, drug and cosmetic useHigh density polyethylene (HDPE) scrapers heat sealed in individual polyethylene bagsGamma irradiated sterile (SAL 10^-6)Lot stamped for accurate tracing; shipped with a Certificate of Processing for SterilizationNote: Sterilized products are not returnable.

Sterilizing Trays & Covers

Sterilizing Trays & Covers

These lightweight and corrosion-proof polypropylene plastic trays have rounded corners for easy cleaning and smooth, tapered sides for stacking.Ideal for sterilizing instruments, bottles containing agar, deionized water, saline and other reagents, and for safely cleaning glassware in sinksPolypropylene covers are 3.2 mm (0.13") thick with a 25.4 mm (1") skirt that fits snugly over the rim of the trayTrays and lids are steam autoclavable at 121 °C (250 °F)

Straining Baskets

Perforated baskets made from polyethylene plastic allow rapid filling and draining, and are handy for batch rinsing and transporting labware as well as straining or filtering large particles.Chemically resistant; withstand acids and alkalisService temperature up to 82 °C (180 °F)Perforations are 2 mm (0.080")Strap handle rises 10 cm (4") above the rim

SP Bel-Art is proud to sell through our distribution partners.

Find Yours Today